Yutaka Crown Carbon Dioxide Gas Heater, SCH-6 Series, Product Code SCH-6

feature

• This is a product that uses a heater to prevent temperature drops under conditions where a large amount of carbon dioxide is supplied.
• The device is designed to be installed on a collection platform and can handle supply flow rates of up to 39Nm3/hr.

Product specifications

• Liquid: carbon dioxide
• Main side working pressure (MPa): 14.8
• Secondary side working pressure (MPa): 14.8
• Inlet connection: W22-14 cap nut (right)
• Socket connection: W22-14 right male
• Standard flow rate (liters/minute): none
• Inlet pressure (MPa): 14.8 or less
• Outlet pressure (MPa): 14.8 or less
• Standard flow rate CO2 pressure 7.5MPa or less 39Nm3/hr
• CO2 pressure 7.5 or more 8Nm3/hr
• Heating capacity: 600W
• Mass/unit mass: 2.3 kg

Terms of use

• When using, please plug it into the power source and turn on the heater for at least 5 minutes.
• If the rear heating cover is not hot even after 3 minutes after turning on the device There may be a problem with the electrical system.
• In this case, please check the power supply and if there is no abnormality, there may be a problem with the heater of this product. Therefore, please contact us or our sales representative.

note

• This product cannot be used with a siphon barrel attached.
• Gas heaters do not have a pressure reducing mechanism.
• When used in conjunction with a pressure reducing device (regulator), connect before the regulator. (entrance side) to improve thermal efficiency