Pressure Regulator Yutaka Crown pressure regulator With built-in heater and flow meter for carbon dioxide. Series FCR-2501, product code FCR25-4-5AB6-2RFH85-F25-100V.

feature

• This is a CO2 pressure regulator with heater. and is a highly versatile product that is the successor to the older FCR-2501 series.
• This device is an excellent product that can provide constant pressure and desired flow rate. Even if the gas state of the carbon dioxide tank changes
• It is a safe product with a built-in thermal fuse and a function to prevent temperature drift due to thermostat failure.

Product specifications

• Liquid: carbon dioxide
• Main side working pressure (MPa): 12.0
• Secondary side operating pressure (MPa): 0.4 or less
• Inlet connection: W22-14 cap nut (right)
• Outlet connection: Φ8.5 mm pipe joint
• Standard flow rate (liters/minute): 1 to 25
• High pressure side pressure gauge: 25MPa gauge
• Inlet pressure (MPa): 12 or less
• Low pressure side pressure gauge: 0.6MPa gauge
• Output pressure (MPa): 0.4 or less
• Flow meter flow rate (liters/minute): 1 to 25
• Flow meter design pressure (MPa): 0.15
• Flow meter method: IN type
• Mass/unit mass: 1.9 kg

Terms of use

• When using, please plug it into the power source and turn on the heater for at least 5 minutes.
• If the rear heating cover is not hot even after 3 minutes after turning on the device There may be a problem with the electrical system.
• In this case, please check the power supply and if there is no abnormality, there may be a problem with the heater of this product. Therefore, please contact us or our sales representative.
• Please turn off the power when not in use.

note

• This product cannot be used with a siphon cylinder.