- 20mm and 25mm are rubber embed types with a flat inner face shown in the left Fig.
- Joints larger than 32mm are able to be supplied with rubber embed type except for 350mm and 400mm.
No. | Part | Materials | No. | Part | Materials |
---|---|---|---|---|---|
1 | Flange | FCD | 4 | Outer Rubber | EPDM(SK10) |
2 | Reinforcing Ring | SWRH | 5 | Reinforcing cord | Synthesized fiber |
3 | Inner Rubber | EPDM(SK10) | 6 | Infill material | Special polymer rubber |
Dimensions and Allowable Movements
Nominal Dia | Dimension (mm) | Mass | Allowable Movement (mm) | Installation Tolerances (mm) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
mm | Inch | L | φd | Eccentricity | Elongation | Compression | Deflection angle | Eccentricity | Elongation | Compression | Deflection angle | |
20 | 45019 | 140 | 25 | 1.1 | 10 | 5 | 10 | 15 | 4 | 3 | 6 | 7.5 |
25 | 1 | 140 | 25 | 1.6 | 10 | 5 | 10 | 15 | 4 | 3 | 6 | 7.5 |
32 | 1 1/4 | 150 | 40 | 2.0 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
40 | 1 1/2 | 150 | 40 | 2.1 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
50 | 2 | 150 | 50 | 2.7 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
65 | 2 1/2 | 150 | 65 | 3.7 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
80 | 3 | 150 | 75 | 3.8 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
100 | 4 | 150 | 100 | 4.6 | 20 | 15 | 20 | 15 | 8 | 3 | 6 | 7.5 |
125 | 5 | 150 | 125 | 6.6 | 20 | 15 | 20 | 15 | 8 | 3 | 6 | 7.5 |
150 | 6 | 150 | 150 | 9.1 | 20 | 8 | 15 | 15 | 8 | 3 | 6 | 7.5 |
200 | 8 | 150 | 200 | 12 | 20 | 8 | 15 | 15 | 10 | 3 | 6 | 7.5 |
250 | 10 | 200 | 250 | 20 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
300 | 12 | 200 | 300 | 22 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
350 | 14 | 200 | 350 | 30 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
400 | 16 | 200 | 400 | 42 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
- Mass is the data when material is FCD450, and flange is JIS10K flange.(350mm-400mm is SS400 JIS10K flange) ● Use a joint within the allowable displacement range.
- The allowable fixing dimension is included in the allowable displacement amount (allowable displacement amount = fixing time displacement + operation displacement)
- Each displacement in the chart are data of a single displacement, so for multiple displacements, correction is necessary. For correction method, refer to “Attention for handling or “TOZEN HP”
- การเลือกตัวเลือกจะส่งผลให้มีการรีเฟรชทั้งหน้า
- เปิดในหน้าต่างใหม่