Solid State Relay Omron G3PA-260B-VD DC5-24

Replaceable SSR power cartridge
DIN rail or surface mounting options
Finger protected terminals
LED input status indicator
Thermal overload indicator changes colour permanently to indicate possibility of a damaged power cartridge
Inputs may be ’commoned’ via integral linking terminals
Release Voltage 1 Vdc (Min)
Operating Temperature Range -30 to +80°C

UL; CSA; VDE

The design of the heat sink provides a smaller SSR – solid state relay with easily maintained replaceable element cartridges. The relays are applicable with 3-phase loads. The G3PA series of SSR – solid state relays can be DIN rail mounted or mounted using screws.

• Phototriac coupler.
• Zero cross function.
• Indicator.
• Rated output load 60 A at 24 to 240 V ac.
• Rated input voltage 5 to 24 V dc.

• Operating voltage range 4 to 30 V dc.
• Input current impedance 7 mA max.
• Must operate voltage 4 V dc max.
• Must release voltage 1 V dc.

• Rated load voltage 24 to 240 V ac, 50 / 60 Hz.
• Load current 0.5 to 60 A at 40°C.
• Inrush current 440 A, 60 Hz, 1 cycle.
• VDRM 600 V.

• Operate and release time of load power source cycle + 1 ms max (DC models). 1 pf load power source cycle + 1 ms max (AC input).
• Output ON voltage drop 4.6 V (RMS) max.
• Leakage current 10 mA max at 100 V ac, 20 mA max at 200 V ac.
• Vibration resistance – destruction – 10 to 55 to 10 Hz, 0.375 mm single amplitude mounted to a DIN rail.
• Shock resistance – destruction – 300 m/s² mounted to a DIN rail.
• Operating temperature – ambient - -30°C to 80°C. No icing or condensation.
• Screw terminal.
• Relay weight 900 g.

• Turn OFF the power supply when replacing a cartridge.
• Damaged cartridges can be replaced without disconnecting the wires.
• If the temperature indicator changes from pink to red triac circuits may be malfunctioning, replace.
• Improve heat radiation efficiency before cartridge replacement.

Zero cross function will allow the relay to turn ON when the AC load power supply approaches 0 V suppressing any noise generated with a sudden load current increase. Zero cross function is effective across 2 types of noise, noise on power lines and noise emitted into open space.

UL; CSA

Zero Voltage Relays

Temperature can affect current rating; please consult the data sheet for potential derating.